0
  • No products in the cart.

OXFORD FOOT MODEL

Multi-segmented, clinically validated native foot model

Download

A clinically tested and validated model that adds a valuable dimension to your studies

The Oxford Foot Model is available as a plug-in that seamlessly integrates with Vicon Nexus.

View Datasheet

OXFORD FOOT
MODEL FEATURES

Clinically validated

The Nuffield Orthopaedic Centre (NOC) has used the Oxford Foot Model clinically for several years after being developed by the NOC and Oxford University. In this time, The NOC has published many clinical papers on the validation of the model during this time. Based on two main foot segments – hindfoot and forefoot – plus a separate hallux segment, the model outputs adjusted kinematics for the ankle as well as the added inter-segment angles.

Seamless

The Oxford Foot Model has been implemented to run seamlessly in the one click processing pipeline of Vicon Nexus, where it appears alongside plug-ins such as Plug-in Gait and Run BodyBuilder Script. You can start using the foot model simply by adding one more processing step to the pipeline, without complicating your existing workflow.

Compatible

The marker set for the Oxford Foot Model is an extension to the Conventional Gait Model, implemented in Vicon Plug-in Gait. This means you can conduct a detailed foot analysis at the same time as you work through the standard gait data acquisition.

Use it at no extra cost

The Oxford Foot Model is available to all Vicon Nexus users at no extra cost. Try it out and see how it can quickly add a valuable dimension to your clinical studies.

Technical information

SPECIFICATION

DOCUMENTATION

DOWNLOADS

FAQS

Specification recommendations

What is the recommended PC specification to run my Oxford Foot Model?

Vicon recommends the following three specifications for use with your Vicon Oxford Foot Model System. If you are using an older version of Vicon software, please contact Vicon to ensure there are no issues or driver limitations if you are upgrading your PC. Your choice depends on your application requirements and the size of your system.

Please note the following:

  • Windows 10 (64bit) Tested and Supported OS
  • .NET Framework 4.5 above
  • GeForce 1050Ti Tested and Supported Graphics Cards
  • INTEL ETHERNET i350/i340 T4 SERVER ADAPTER RJ45 PCI−E and INTEL ETHERNET i210−T1 GBE NIC Tested and Supported Network Cards (NIC)
  • Samsung SSD 850 EVO 250GB – Tested and Supported
Advanced PC
Minimum specs include:

mATX 4 drive bay chassis
INTEL® CORE™ i9-7900X PROCESSOR
Corsair Hydro H100i Cooler
32GB (2x16GB) 2666MHz RAM
GeForce 1050Ti
2 off 250GB SSD Boot Drive Read 530MB/s
1 off 3TB WD Black 7,200RPM HDD
650W 80 PLUS Platinum PSU
Asus X99 MOBO
1 off 4 Port Intel I350-T4 Gigabit network Card
64 bit Windows 10 operating platform

Advanced dual video PC
Minimum specs include:

mATX 4 drive bay chassis
INTEL® CORE™ i9-7900X PROCESSOR
Corsair Hydro H100i Cooler
32GB (2x16GB) 2666MHz RAM
GeForce 1050Ti
2 off 250GB SSD Boot Drive Read 530MB/s
1 off 3TB WD Black 7,200RPM HDD
650W 80 PLUS Platinum PSU
Asus X99 MOBO
1 off 4 Port Intel I350-T4 Gigabit network Card
64 bit Windows 10 operating platform

Advanced quad video PC
Minimum specs include:

mATX 4 drive bay chassis
INTEL® CORE™ i9-7900X PROCESSOR
Corsair Hydro H100i Cooler
32GB (2x16GB) 2666MHz RAM
GeForce 1050Ti
3 off 250GB SSD Boot Drive Read 530MB/s
1 off 3TB WD Black 7,200RPM HDD
650W 80 PLUS Platinum PSU
Asus TUF X99 MOBO
1 off 4 Port Intel I350-T4 Gigabit network Card
1 off i210 NIC
64 bit Windows 10 operating platform

Download Oxford Foot Model

Download File

Oxford Foot Model _ 1.4

Oxford Foot Model 1.4
Abstract
File Name: OxfordFootModel_1.4.56655_x86.zip

The current version of Nexus 2 includes Oxford Foot Model.

The Oxford Foot Model was developed and validated by the Nuffield Orthopaedic Centre in collaboration with Oxford University.

The Vicon implementation of the Oxford Foot Model provides users with an easy-to-use plug-in which can be included in the processing pipelines of either Vicon Nexus 1.x or Vicon Workstation 5.x. The Oxford Foot Model Plug-in is designed to fit straight into the pipeline with the usual gait plug-ins such as the Woltring Filter, Gait Cycle event detection, and Plug-in Gait.

Requirements
The Oxford Foot Model is compatible with and fully supported under the Windows 7 64-bit operating system. Installation, software operation, and required third-party drivers are tested under the Windows 7 operating system. Although the Oxford Foot Model may install and function under other Microsoft Windows operating systems, this combination is not officially supported or recommended by Vicon.

In addition, you will require the appropriate Vicon software in order to run the Oxford Foot Model Plug-in; either Vicon Workstation or Vicon Nexus.

FAQs

GET IN TOUCH

Vicon are here to support you on your Motion Capture journey. We’re happy to provide more information, answer questions and help you find the solution you need. Get in touch with our experts today.

STAY UP TO DATE

Get in touch

Newsletter signup

Please tell us a little more about yourself

I'm interested in:


Newsletter signup

Thanks for subscribing!

Please check your email for a confirmation message.

Catch up on the latest news

Whilst you wait for our next newsletter, maybe you would like to check out our latest news, or read our annual magazine ‘The Standard‘ for the latest industry news in detail.

Latest News

Female

Small Medium Large
Chest 78.7cm / 31in 85.1cm / 33.5in 87.6cm / 34.5in
Waist 63.5cm / 25in 68.6cm / 27in 78.7cm / 31in
Hips 81.3cm / 32in 86.4cm / 34in 91.4cm / 36in
Inside Leg 66cm / 26in 69.9cm / 27.5in 77.5cm / 30.5in

Male

Small Medium Large Extra Large
Chest 86.4cm / 34in 94cm / 37in 103cm / 40.6in 114.3cm / 44.5in
Waist 71.1cm / 28in 83.8cm / 33in 90cm / 35.4in 99.1cm / 39in
Hips 88.9cm / 35in 94cm / 37in 100cm / 39.4in 109.2cm / 43in
Inside Leg 66cm / 26in 69.2cm / 27.3in 71cm / 28.3in 81.3cm / 32in