Firmware 704 (via Reprogramming Tool)

Abstract

File Name: ViconFirmwareUpdateUtility_704.zip

The firmware update utility provides a robust guided workflow that allows you to update your camera firmware more reliably.

When the utility is installed and started, unblock it from the Windows firewall in order for it to communicate with the cameras and reprogram them.

Firmware 704 fixes several issues with Vero & Vue cameras as well as deploying previous fixes for Vantage cameras:

  • Changing from 120Hz 2:1 to 1:1 causes corrupt images in Vue
  • Vue video shutter period is not aligned with main system when running subsampled
  • Vue stops sending data when calibration mode deactivated when subsampling at 3:1
  • OLED display goes blank
  • The camera noise floor becomes visible when the threshold on a Vantage camera is set to around 0.1
  • Display freezes in pie chart during calibration
  • Torn image on display when bumped
  • 2000Hz not possible
  • Unable to run over 1935Hz in Tracker
  • OLED goes blank after camera sits for a while after being bumped
  • Nexus 2.5 sensor "block" on T-series cameras
  • Changing from 120Hz 2:1 to 1:1 causes corrupt images in Vue
  • Vue video shutter period is not aligned with main system when running subsampled
  • Vue stops sending data when calibration mode deactivated when subsampling at 3:1

Requirements

Vantage, Vero or Vue camera based systems & Lock/Lock+

Bonita & T-Series cameras will also benefit from having the firmware upgraded

Download File