Read through our frequently asked questions below

Build My System

Should my calibration wand be set to strobe or continuous?

You should use Strobe mode whenever possible. However, in the following cases, Continuous mode may give better results:

    • In large volumes, if the camera’s strobes are not bright enough to activate the wand’s sensor
    • In cases of high light pollution, for example, in direct sunlight
    • To calibrate video cameras
    • Using a system where the cameras do not have strobes (e.g Vipers or Viper Xs)


NB: Strobe mode is required for mixed systems that include T-160 cameras.